Commercial Kitchen Exhaust System Components Practice Test

These questions are part of the practice quiz. Start practicing

• What is the static pressure in a kitchen exhaust system?
• Which option is described as available for certain applicants and not eligible for online renewal?
• How many questions are on the Renewal exam?
• What is the primary hazard that kitchen fire suppression systems address?
• What factors drive how often hood and duct cleaning is performed?
• Which item is required specifically for company employee renewals?
• Which certificate pertains to premises related to the employer's location?
• What device captures grease before entering ducts?
• Why is access to every part of the exhaust system essential for maintenance?
• Which byproducts accumulate in solid fuel cooking exhaust systems?
• Which form of payment is described as physical currency?
• Which type of supervision is described as supervision by a Certificate holder not always present?
• What is the typical consequence of grease buildup in ductwork if not cleaned?
• Which term describes a payment card linked to a bank account for direct withdrawals?
• Which item is associated with a renewal reminder for C of F?
• Why is a grease trap or drain sometimes required in hood installations?
• Which term describes an evaluation format that presents several options per question?
• Device covering openings in ducts or equipment.
• Which document indicates the need for renewal?
• Which device captures and directs grease to a safe point?
• What term describes the minimum percentage required to receive a Certificate of Fitness?
• Which term refers to the main conduit for air and vapors, including fittings and dampers?
• Which material finish is specifically mentioned as desirable for interior duct surfaces to minimize grease buildup and ease cleaning?
• Which statement best describes how operating a kitchen exhaust fan with a variable frequency drive (VFD) benefits energy efficiency?
• Which term describes cooking using solid fuels?
• Which practice is essential when working near high-temperature fuel in kitchen exhaust systems?
• In a multi-hood installation, what is the purpose of a common plenum?
• Name two common types of grease filters used in commercial kitchen hoods.
• What term is used for the additional charge assessed when paying by credit card?
• During post-installation testing, which aspects are checked to ensure safety and performance?
• Which hood is used to exhaust non-grease equipment, such as dishwashers?
• Which term is an accessory enhancing the primary device function?
• What term refers to the location where tests are administered?
• What is the purpose of a grease filter differential pressure gauge?
• What device is used for interactive test-taking?
• How do variable frequency drives (VFDs) on exhaust fans contribute to energy efficiency?
• How is Renewal Online processed?
• Which term refers to organic fuel such as briquettes or charcoal?
• For fires, which extinguisher types are appropriate?
• Which type of oven is explicitly listed in the material?
• Which certificate is tied to premises related to an employer's location?
• Which of the following best describes the intended use of a Type II hood?
• Which term denotes the organization allowing FDNY to use its information?
• What typically happens after a kitchen fire suppression system is discharged?
• Which option provides immediate status for passing an exam but requires re-application for failures?
• Which item varies based on cooking equipment and menu selections?
• What is the role of a make-up air system in a kitchen exhaust setup?
• What is the minimum ACORD policy amount for F-64?
• What documentation is commonly requested during an AHJ inspection of a kitchen exhaust system?
• What term denotes the set of regulations for commercial kitchen exhaust systems in a city?
• Peak Fire Times in a commercial kitchen most commonly occur during which window?
• Which methods are typically used for interior kitchen exhaust duct cleaning?
• Which device removes grease particles from exhaust streams?
• What term refers to content created for exam preparation?
• Which term describes a barrier that does not allow liquid passage at any temperature?
• Which code is indicated as governing compliance in relation to exhaust systems?
• Which factor NOT typically considered when determining cleaning frequency?
• What is a potential consequence of undersized ductwork for a given exhaust CFM?
• Which term refers to the NFPA standard for commercial cooking safety?
• What happens to static pressure when duct cross-sectional area increases while maintaining the same CFM?
• What safety action should be performed before cleaning commercial kitchen exhaust systems?
• What is the primary safety purpose of exhaust system cleaning?
• Which action is sent 90 days before expiration and places renewal responsibility on the applicant?
• Under the P-64 certificate, who is authorized to clean specific precipitators?
• What is required to change the Mailing Address?
• Which certificate is required for inspection and cleaning of commercial cooking exhaust systems?
• Which three elements comprise the Fire Triangle?
• What is the name of the document that signals a certificate must be renewed?
• Which term is the organization that allows FDNY to use its information?
• What is the purpose of a fire damper in ductwork that penetrates a fire-rated wall?
• Which certificate is titled 'Certificate for Commercial Kitchen Exhaust System Cleaning Servicing'?
• What is the purpose of a curb in hood installations?
• Which buildup occurs in solid fuel cooking exhaust systems?
• Which statement reflects exhaust system regulations regarding operation?
• What is the primary purpose of makeup air in a kitchen exhaust system?
• What is the purpose of grease containment within the hood system?
• Which term means 'Acceptable to governing bodies'?
• Which term serves as a passageway for air and vapors through buildings, including fittings and dampers?
• What safety practices are commonly required for personnel working on kitchen exhaust systems?
• Which term certifies qualifications to supervise refrigerating system operation?
• Which item is required for failed applicants and involves a new application and payment?
• Courtesy Notice requirements
• Which component helps regulate airflow and prevent backdrafts in a kitchen exhaust system?
• Which term is the document that signals a renewal is required for a certificate, when presenting the options?
• Why are baffle filters often preferred in Type I hoods over simple mesh filters?
• Which term represents the NFPA standard for commercial cooking safety?
• What is the main function of the hood plenum?
• Where should a fire damper be installed?
• What is the primary difference between Type I and Type II hoods?
• What method is used for administering the F-64/W-64/P-64 exam?
• What is the recommended practice for commissioning a kitchen exhaust system?
• Which item contains the employer's location for F-64 validity?
• What is a valid payment method for renewal fees?
• Which term describes the safety discipline focused on protecting personnel and reporting deficiencies in compliance?
• What term describes the regulations governing commercial kitchen exhaust systems in a city?
• Which document indicates the need for certificate renewal?
• What safety system is typically required to control and suppress a grease fire in a kitchen hood?
• Which word indicates a recommended action rather than a mandatory one?
• Why is hood face velocity significant in a commercial kitchen exhaust system?
• Which option provides immediate eligibility for passing an exam but requires re-application for failures?
• Which certificate allows cleaning of specific precipitators and supersedes other certificates?
• Which term refers to a person who can clean specific precipitators when authorized by P-64?
• Which is required for W-64 and F-64, but not mandatory for exam takers?
• Which term means something that is within reach without mechanical aid?
• Which term describes a passageway for air and vapors, including fittings and dampers?
• Which indicator suggests a grease filter should be replaced rather than cleaned?
• Which term denotes a set of appliances used in commercial cooking that produce grease vapors?
• Commercial cooking design requires design, installation, and maintenance per which codes?
• What role do dampers play in balancing kitchen exhaust systems?
• What is a major risk of neglecting regular duct cleaning?
• Grease filtration efficiency not compliant if serviced by the same exhaust system as gas-fired charcoal grills. True or false?
• Name two common types of grease filters used in commercial kitchen hoods.
• Which statement is true about NFPA 96's expectations for hood system maintenance?
• What documentation shows adherence to fire safety regulations?
• Which payment method includes American Express, Discover, MasterCard, or Visa?
• Which item is NOT typically required to be kept for NFPA 96 compliance?
• A grease containment within the hood system primarily serves to:
• Where are fire suppression system discharge nozzles usually located in a kitchen exhaust setup?
• What is the fee for the Courtesy Notice?
• What material is commonly used for interior duct surfaces to minimize grease buildup and aid cleaning?
• Which factor determines how often kitchen exhaust systems should be cleaned?
• Which hood type collects grease vapors and smoke in kitchens?
• Which renewal action involves submitting both the renewal notice and fee payment in person?
• What is the purpose of a grease trough or tray under the hood?
• What is the purpose of a duct access panel?
• What evidence should be provided to show compliance with NFPA 96 after installation?
• How often is the Insurance Policy renewal required?
• Which word indicates a recommended action?
• Which item is typically included as NFPA 96 compliance evidence after installation?
• What is the role of makeup air in a kitchen exhaust system?
• What type of records are commonly required to be kept for NFPA 96 compliance?
• What is the typical unit of measure for static pressure in ductwork?
• High-Limit Controls remove grease particles of which size?
• Which term describes an item that enhances the function of the main device?
• Which term denotes exemption from payment for eligible government employees?
• Which hood exhausts non-grease equipment, like dishwashers?
• How does having multiple hoods affect the duct design?
• Which term describes content used for exam preparation?
• High-limit controls are critical for removing grease particles of what size?
• What is a potential consequence of improper sequencing of dampers and interlocks during commissioning?
• Which term means removing grease, oil, and residue from kitchen systems?
• What is the purpose of electrical interlocks between the fire suppression system and the exhaust fan?
• Which set correctly lists typical components of a kitchen exhaust fire safety system?
• What term describes the end-portion of a duct system ensuring proper function?
• Which statement best describes the scope for commercial cooking design?
• Why are back-draft or relief dampers sometimes required in kitchen exhaust designs?
• Which is defined as a net filter with spaces between intersecting strands?
• Which term indicates a mandatory requirement?
• Identify the term that describes a certificate issued by a fire authority related to refrigerating systems.
• When sizing an exhaust fan, what describes the relationship between CFM, duct size, and static pressure?
• Which term corresponds to the NFPA standard for commercial cooking?
• Which document is the A-20 Form used for?
• Why is regular interior duct cleaning and inspection important?
• Which term describes the inspection used to verify grease buildup and access in exhaust systems?
• What is required to renew online?
• Which term describes a term used in regulatory language to indicate a mandatory requirement?
• Which term refers to checks grease buildup and access in exhaust systems?
• Which action is required to obtain the Replacement Certificate online?
• Which certificate allows cleaning of specific precipitators and supersedes F-64 and W-64?
• What maintenance action reduces the risk of greasy nozzle clogging in fire suppression systems?
• What percentage is required to pass the Renewal exam?
• What control is required for exhaust duct cleanout in deep fat fryer installations?
• What is the purpose of openings in exhaust hoods?
• Which abbreviation stands for the Fire Department of the City of New York?
• Why is it important to verify electrical connections in kitchen exhaust installations?
• During commissioning, which documentation should be created to verify system performance?
• What role do detectors/interlocks play in kitchen exhaust safety?
• The Examination is available for which group?
• What are potential consequences of using a non-compliant fire suppression system?
• Which item serves as proof of the employer's location in the F-64 system?
• What is the function of a Renewal Notice?
• Which device captures grease before entering ducts?
• What is the function of motor overload protection in exhaust fan motors?
• What term describes the responsibility to protect and report loss of compliance proof?
• Which component is used to channel clean air into the kitchen to balance exhaust air?
• Which term refers to restricting proof of compliance to the issuing business?
• Exhaust hood requirements specify openings for cleaning and maintenance per which code?
• What is the function of a makeup air damper in a kitchen exhaust system?
• Which term describes the type of effluent produced by different cooking methods?
• End-portion of a duct system ensuring proper function is called what?
• Which term means that proof of compliance is restricted to the issuing business?
• Which term is used in food establishments, producing grease vapors?
• Which term means within reach without mechanical aid?
• What is the typical purpose of a duct cleanout?
• Which term refers to animal fat or vegetable matter used in cooking?
• What practice reduces the likelihood of duct fires in restaurants and similar facilities?
• Which term describes an exemption from payment for eligible government employees?
• Renewal by Mail means what?
• Which action is typically required before reactivating a kitchen exhaust system after a fire suppression discharge?
• Why is stainless steel commonly used for kitchen exhaust ductwork?
• When is the renewal reminder sent?
• Which standard primarily governs design, installation, maintenance, and testing of commercial kitchen ventilation systems in the United States?
• Which component collects grease vapors and smoke in kitchens?
• Which term refers to protective gear including eye, respiratory, hand, foot, energy, fall, and head protection?
• Which term prevents grease passage under normal cooking?
• Which document is the application form for Certificate of Fitness?
• What component is the first line of defense for grease capture in a Type I kitchen hood?
• Which of the following statements best describes the primary function of an automatic fire suppression system in a kitchen hood?
• In NFPA 96, who is responsible for ensuring the hood and duct system is properly installed and maintained?
• Which term denotes an official document indicating approval by authorities?
• Which term describes an individual with P-64 who can clean specific precipitators?
• Which option best describes the protective gear required during cleaning operations?
• Which term describes supervision by a certificate holder present on-site?
• What is the primary purpose of post-installation performance testing of a kitchen exhaust system?